This is my latest project. I have been working on this typewriter desk for the last few months. I found it at the Deseret Industries on 7th South in Salt Lake City. I was able to swindle this little desk away for $20.
The thing I love about this desk is how mechanical it is. There are drawers, pull out tables, lift tops, and a drop down typewriter platform.
Initially it was made to store your typewriter. You attach your typewriter to the platform that drops down into the desk. Because early typewriters were very tall you needed a large space to be able to store them.
Because of deep gouging to the surface and really rough areas of this piece I started with 100 grit sandpaper and worked my way up to 220 grit.
I bought a detail sander that truly was priceless. It enabled me to avoid hand sanding every corner where the orbital wouldn't fit, and there were a ton on this piece (a few are shown below). There was still a ton of hand sanding, and that by far is my least favorite part of refinishing.
Because of the way the platform slides down at a 45 degree angle when stored and pulled up level when in use there was a lot of damage and wear to these rails. I ended up removing all the rails and rebuilt them. While they were off I also took the opportunity to use my random orbit sander instead of hand sanding.
I am very pleased with the final result. This piece is actually very similar to the wardrobe I did a few years ago. The three wood panels across the top match the wardrobe almost exactly. Before I sanded the stain, dirt, and years of wear off those panels I did not realize it was the same marbled-knotty-wood.
